Global Industrial LLC - Industrial Equipment Latest Products Feed

Allen Bradley (Allen Bradley 1785 V40B PLC-5 V40B VME 1785V40B CPU Module 48K Word SRAM Used)

Fri, 19 Feb 2010 00:00:00 GMT

Used Allen Bradley VME 1785V40B CPU Module
Guaranteed Working Take Out
*2 of these modules are available*
*Price listed is price per unit*
*Free Continental USA Shipping*

This very hard to find Allen Bradley 1785V40B CPU MODULE VME PLC-5/40 48K WORD SRAM was recently removed and is in good working order. This unit is guaranteed. This CPU lists at over $27,000 NEW! Why pay new, when you can buy a guaranteed working unit and save over 85%? This unit is as good as new and is guaranteed to be in good working order.

Allen Bradley VME
PLC-5/V40B
1785V40B
1785-V40B

Taylor-Dunn (Used Taylor Dunn Model B2-48 B248 Electric Cart with Hydraulic Dump Box 36 Volt Sinle Phase Charger B2 48 Burden Carrier)

Fri, 19 Feb 2010 00:00:00 GMT

Used Electric Taylor Dunn Model B2-48 Cart Plant Transport / Burden Carrier with Dump Box
*This unit requires a change of batteries*
Model: B2-48

This is a high capacity electric cart great for hauling tools and equipment throughout manufacturing plants OR for the car show or auction person-Great for hauling your new finds! Just plug it in with the supplied unit mounted 110V Sinfle Phase charger, set it-forget it and go! This unit has an electrically powered hyrdraulic dump box!

Taylor Dunn Electric Cart Specifications:

Model:                        B2-48
Serial Number:       112178
Rated Capacity:        3000 lbs.
Gross Weight:        2800 lbs.
Volts:                           36
Charger Included:    Yes   (Single Phase 110 V)

Carver (Used Model C Carver Laboratory Bench Top Press 12 Ton 3851 2086 21900-38)

Thu, 18 Feb 2010 00:00:00 GMT

Used Carver Laboratory Press Model C

This is a used Carver Bench top press. This unit is a model C. Specifications for this unit can be found in Carver's website here -> http://www.carverpress.com/benchtop_manual_standard_presses.html# This unit was purchased due to an engineering company that does work for the Big 3 closing its doors. This unit was used up to the last day of work and is very good condition.

Specifications taken from www.carverpress.com:

Carver Standard Bench Top Laboratory Press
Model C ( 3851 , 2086 )
Serail # 3464
Clamping Force in lbs : 24,000
Platens (inches) : 6 x 6
Ram Stroke (inches) : 5.1
Daylight Opening (inches) 0.75 - 18

Square D (Square D QED Panel Bolted Pressure Contact Switch Ground Fault BP03620 EI Bolt Loc Type BP 2000 Amp Used)

Thu, 18 Feb 2010 00:00:00 GMT

Used Square D QED Panel with Ground Fault Indicator
2000 Amps Bolted Pressure Contact Switch BP03620 EI

This panel was recently removed from a large manufacturing facility that no longer required its use. It is in good working order and is ready to go. This panel is IN-STOCK and ready to ship.

Specifications:

Square D QED Electrical Panel

Amps:                  2000
Volts:                   480 Y / 277
Hz:                         60
Phase:                   3
Wire:                    4
Ground Fault:       Yes ( Ground Censor )
Enclosure:            Type 1
Cat / Drawing #   2859207A

Square D Bolted Pressure Contact Switch Bolt Loc

Catalog #      BP03620EI
Type:              BP
Amperage:   2000
Volts:             600
Hz:                  60
Phase:           3

ABB (ABB IRB 5400 Paint Robot Mastering Kit Calibration Fixture 3HNM 02097-1 N2254 S4P+ Used)

Tue, 16 Feb 2010 00:00:00 GMT

Used ABB IRB 5400 Paint Robot Calibration / Mastering Kit with case.

This is a used ABB Calibration / Mastering Kit for the IRB5400 S4P+ Paint Robots. This is a very rare and hard to find item out on the used market. Everything pictured you recieve. If you have an ABB IRB 5400 paint Robot and need this kit, call us today. This is IN-STOCK and ready to be shipped worldwide!

This kit is used for ABB IRB 5400 S4P+ Paint Robots

-Calibration Fixture N2254
-Matering Kit 3HNM 02097 -1
-Case is Included

Taylor-Dunn (Used Taylor Dunn B2-54 Burden Carrier Plant Transport Electric 36V B254 B2 54)

Mon, 15 Feb 2010 00:00:00 GMT

Used Electric Taylor Dunn Model B2-54 Cart Plant Transport / Burden Carrier
*This unit requires a change of batteries and minor maintenece*
Model: B2-54

This is a high capacity electric cart great for hauling tools and equipment throughout manufacturing plants OR for the car show or auction person-Great for hauling your new finds! Just plug it in with the unit supplied 110 Volt Single Phase charger, set it-forget it and go!

Taylor Dunn Electric Cart Specifications:

Model:                                                     B2-54
Serial Number:                                     127695
Rated Capacity:                                    5000 lbs.
Gross Weight (Including Batteries) 1760 lbs.
Volts:                                                        36
Battery Charger Included:                   Yes (Unit mounted 110 V Single Phase)

Square D (Square D QED Power Style Switchboard 800 Amp 480 Y 277 14255214-002 MEL36800LS Includes Circuit Breakers)

Mon, 15 Feb 2010 00:00:00 GMT

NEW Never Energized or Wired
Square D Power-Style QED Switchboard with Circuit Breakers

This is a NEW never wired Square D Circuit Breaker Lineup. This price includes all of the circuit breakers in the panel. All drawings and information is included with purchase. This unit is IN-STOCK and ready for immediate shipment.

Square D QED Switchboard SPECIFICATIONS:

QED Power-Style Switchboard
Amperage : 800
Voltage:        480Y / 277
Hz:                 60
Phase:          3
Wire:             4
Catalog / Drawing Number: 14255214-002

DIMENSIONS OF PANEL:

Height:        91.5"
Width:            42"
Depth:        19.5"

Square D Circuit Breaker Specifications:

Qty: 1 Square D 800 Amp Cat# MEL36800LS
Qty: 1 Square D 500 Amp Cat# LC36500
Qty: 2 Square D   80 Amp Cat# FJA34080
Qty: 2 Square D   20 Amp Cat# FJA 34020

*ALL OF THE ABOVE LISTED BREAKERS AND PANEL IS INCLUDED-ALL ARE NEW-NEVER ENERGIZED*

Snap-On (Used Snap On Torque Multiplier YA395 Geared Head Multiplier with Plate Reaction 8000 lb ft Snap-On YA 395)

Mon, 15 Feb 2010 00:00:00 GMT

Used Snap -On Torque Multiplier / Geared Head Multiplier with Plate Reduction
Model: YA395

This is a used Torque Multiplier made by the best name in the industry: SNAP-ON. This lists at over $7700 new. Buy it today for a fraction of this price. It is tested and is ready to go.

Snap-On Geared Head Multiplier with Plate Reaction

SPECIFICATIONS:

Model:                               YA395   YA 395
Reaction Type:                  Plate
Output Capacity, ft. lbs.    8000
Input Capacity, ft. lbs.         154
Gear Ratio:                         60:1
Torque Ratio:                     52:1
Reductions:                             2
Input Drive Female:            1/2"
Output Drive Male:           1 1/2"
Bearings:                         Needle
Length:                             15 1/2"
Width:                                       6"
Height:                              10 3/4"

Below is a list of similar products but are NOT Snap-On. All of these "knock-offs" are still priced at over 50% more than this real-deal Snap-On!

Similar to Stanley J6252
Similar to Armstrong 64-844 , ARM64-844
Similar to 9S395

Cleaver Brooks (Cleaver Brooks CB Hawk Thermocouple Module 985-100 Used 118-2935 Thermo Couple)

Mon, 15 Feb 2010 00:00:00 GMT

Used Cleaver Brooks CB Hawk Enhancer Thermocouple Module Part # 985-100
118-2935
CB Hawk PLC

This is a module from the Cleaver Brooks CB Hawk System. We have this unit IN-STOCK ready for immediate delivery.

Cleaver Brooks Thermocouple Module
Part No. 985-100
118-2935
8 Thermocouple Inputs Supported: J , K , N , T , E , R , S
Accuracy + / - 0.5 Degree Celsius Typical (Type J)

Cleaver Brooks (Cleaver Brooks CB Hawk DC Output Module 985-92 PLC IC693MDL731F 118-2933)

Mon, 15 Feb 2010 00:00:00 GMT

Used Cleaver Brooks CB Hawk Enhancer DC Output (8) Module Part # 985-92
118-2933
CB Hawk PLC

This is a module from the Cleaver Brooks CB Hawk System. We have this unit IN-STOCK ready for immediate delivery.

Cleaver Brooks DC Output Module
Part No. 985-92
118-2933
IC693MDL731F
DC Output
12 / 24 VDC 2A 8PT NEG

Cleaver Brooks (Used Cleaver Brooks CB Hawk DC Input 985-96 PLC 118-2934)

Mon, 15 Feb 2010 00:00:00 GMT

Used Cleaver Brooks CB Hawk Enhancer DC Input (16) Module Part # 985-96
118-2934
CB Hawk PLC

This is a module from the Cleaver Brooks CB Hawk System. We have this unit IN-STOCK ready for immediate delivery.

Cleaver Brooks DC Input Module
Part No. 985-96
118-2934
IC693MDL645E
DC Input 7.5 ma
24 VDC 16PT POS / NEG Logic

Cleaver Brooks (Used Cleaver Brooks CB Hawk PCM 985-98 CB Hawk 118-2932 Programmable Coprocessor Module IC693PCM300P)

Mon, 15 Feb 2010 00:00:00 GMT

Used Cleaver Brooks CB Hawk Enhancer PCM Module Part # 985-98
118-2932 / 118-2941
CB Hawk PLC Programmable Coprocessor Module

This is a module from the Cleaver Brooks CB Hawk System. We have this unit IN-STOCK ready for immediate delivery.

Part No. 985-98
118-2941 118-2932
IC693PCM300P
Programmable Coprocessor Module PCM

Cleaver Brooks (Used Cleaver Brooks CB Hawk CPU 985-93 118-2931 IC693CPU331-CE)

Mon, 15 Feb 2010 00:00:00 GMT

Used Cleaver Brooks CB Hawk Enhancer CPU Module Part # 985-93
118-2931
CB Hawk PLC

This is a module from the Cleaver Brooks CB Hawk System. We have this unit IN-STOCK ready for immediate delivery.

Part No. 985-93
118-2931
IC693PWR321W
IC693CPU331-CE
CPU Module
CPU 331 Ver. 6.61

Cleaver Brooks (Used Cleaver Brooks Power Supply 985-94 118-2930 985 94 CB Hawk Enhancer)

Mon, 15 Feb 2010 00:00:00 GMT

Used Cleaver Brooks CB Hawk Enhancer Power Supply Part # 985-94
118-2930
CB Hawk PLC

This is a module from the Cleaver Brooks CB Hawk System. We have this unit IN-STOCK ready for immediate delivery.

Part No. 985-94
118-2930
IC693PWR321W
Power Supply
120 / 240 VAC 125 VDC STD

Cleaver Brooks (Used Cleaver Brooks Control Bus Module 833-2425 ControlBus CB Hawk)

Mon, 15 Feb 2010 00:00:00 GMT

Used Cleaver Brooks Control Bus Module 833 2425
CB Hawk

This is a module from the Cleaver Brooks CB Hawk System. We have this unit IN-STOCK ready for immediate delivery.

Part No. 833-2425
Use Connector 833-2506
Temp 32 Degrees F - 130 Degrees F
0104 (Number on back)
201276 Rev E

Cleaver Brooks (Used Cleaver Brooks ControlBus Module 833-2757 Control Bus CB Hawk)

Mon, 15 Feb 2010 00:00:00 GMT

Used Cleaver Brooks Control Bus Module 833 2757
CB Hawk

This is a module from the Cleaver Brooks CB Hawk System. We have this unit IN-STOCK ready for immediate delivery.

Part No. 833-2757
Use Connector 833-2506
Temp 32 Degrees F - 130 Degrees F
0050 (Number on back)
209167 Rev

Cleaver Brooks (Used CB ControlBus Module 833-2425 Cleaver Brooks Control Bus Hawk 8332425)

Mon, 15 Feb 2010 00:00:00 GMT

Cleaver Brooks (Cleaver Brooks ControlBus Module 833-2425 Control Bus Used 201276 Rev E CB Hawk )

Mon, 15 Feb 2010 00:00:00 GMT

ABB (ABB Teach Pendant S3 M93 3HAB2136-001 Q3HAB2136 NEW REMANUFACTURED IRB 6000 3000 2000)

Wed, 10 Feb 2010 00:00:00 GMT

Remanufactured ABB M93 S3 Robot Teach Pendant

This is a remanufactured Teach Pendant that was a spare for robots in a large manufacturing plant. This teach pendant is tested and ready to go. This teach pendant was remanufactured by ABB.

ABB S3 M93 Teach Pendant REMANUFACURED and TESTED!
Program Unit 10M M93
Cat# Q 3HAB2136 001 Q3HAB2136-001

This teach pendant is tested and ready to go! TWO (2) of these teach pendants are available. This teach pendant can be used for various ABB M93 Models including:

ABB IRB 6000
ABB IRB 3000
ABB IRB 2000

If you are unsure this teach pendant will work for you and your robot, please do not hesitate to call. This teach pendant is INSTOCK and ready to go!

XYCOM (XYCOM XVME-660 VME BUS XVME 660 XVME660 Intel Used)

Wed, 3 Feb 2010 00:00:00 GMT

Used XYCOM XVME-660 CPU with Intel Pentium III 700 MHz Processor
Part # 70660-716

This CPU is a working takeout in excellent overall condition. It is ready to go! IN STOCK and ready for Immediate Overnight Delivery.

Overview:

XVME-660 Pentium III VMEbus Processor Module with Integrated IP and PMC Expanded Sites 6U VMEbus, Two-Slot 700MHz Pentium III PC/AT compatible processor with hardware byte-swapping, 16 bit ultra-SCSI, ultra-PMA-33 EIDE, AGP Video with 4 MB display memory, Compact Flash site, one PMC site, and one IndustryPack site.

The XVME-660 is a powerful VMEbus PC compatible Processor module from Xycom Automation, a pioneer and leader in VMEbus PC technology. This powerful VMEbus processor integrates an Intel Pentium® III 700 MHz Socket 370 CPU with a PCI-to-VMEbus interface, and allows users to take advantage of the powerful multiprocessing capability of the VMEbus while using standard off-the-shelf PC software and operating systems.

I/O Support
The XVME-660 module contains a wide breadth of I/O including PCI EIDE, Ultra SCSI and Ethernet controllers, and a USB port.

IP & PMC Expansion
For I/O expansion, the XVME-660 has one PMC site and one Industry Pack site. These sites allow easy I/O expansion without the use of a carrier board. A variety of expansion modules are available for use with the XVME-660.

Features
-Intel® Pentium III 700 MHz Socket 370-based CPU
-100 Mhz (Pentium III processor) frontside bus
-Supports up to 256 MB of SDRAM (one 144-pin SODIMM)
-256K (Pentium III processor) on-chip L2 cache
-High-performance 64-bit AGP graphics controller with 4 MB SDRAM
-PCI EIDE controller with DMA-33
-PCI SCSI controller, 16-bit wide ultraSCSI up to 40 MBps
-10Base-T/100Base-TX PCI Ethernet controller with front RJ-45 connector
-IDE compact flash site
-PCI-to-VMEbus interface with DMA
-Two high-speed 16550-compatible serial ports - COM1 configurable to RS-485 or RS-232C
-Universal Serial Bus (USB) port
-EPP or ECP parallel port
-PS/2-style keyboard and mouse ports
-Industry Pack (IP) expansion site
-PMC expansion site
-Watchdog timer
-Configurable hardware byte-swapping logic

General Signal (Used 30 KVA Dry Transformer Delta Delta 480 Volts 240 Volt 120 Three Phase T5H30S)

Fri, 29 Jan 2010 00:00:00 GMT

Used General Signal 30 KVA 3 Phase Dry Transformer
THREE PHASE
HV 480 DELTA
LV 240 DELTA / 120
Cat# T5H30S

This is a used three phase dry transformer that is in good overall condition. It was slightly damaged during removal. Please look at the pictures to see this slight damage. It tests good and is ready to go.

Specification:
General Signal HD Hevi-Duty Dry Transformer
KVA 30
Phase 3
Hz 60
HV 480 Delta
LV 240 Delta / 120
Enclosure Type 1
NEMA Class AA
Impedance 7.2%
Temp Rise 150 Degrees C
Class 220 Insulated
Weight 270 lbs.

This transformer is in stock and ready to go. Call us today to place an order.

Caterpillar (Used Caterpillar 3512 Generator 1000KW 1000 KW 480 Volts Under 1000 Hours)

Fri, 29 Jan 2010 00:00:00 GMT

Used Caterpillar 3512 Generator Set

This Caterpillar 3512 Generator is in very good condition. It has under 1000 hours of total running time. It has a remote mounted radiator and is ready to go. It was new in 1987 and has plenty of life left. This unit does not have an engine mounted control panel or a mounted circuit breaker. This unit was used as part of a 3 generator system and was used in a paralling system. You will not find a cheaper CAT 3512 Generator ANYWHERE with under 1000 hours. Please do not hesitate to call.

Engine Specification:
Engine Model: CAT 3512
Engine HP @ 1800 RPM: 1482
Engine KW @ 1800 RPM: 1105
Fuel: Diesel
Radiator: Remotely Mounted Included
Enclosure: NO
Circuit Breaker on Unit: NO
Engine Controls on Unit: NO Remotely mounted in paralleling gear
HOURS: UNDER 1000 Total Running Time

Generator Specification:
Generator End Model: Caterpillar SR-4
Standby Rated
KW Rating: 1000
KVA Rating: 1250
Voltage: 480 Volts
Hertz: 60
Phase: 3

Please call us anytime. This unit is IN STOCK and ready to go!

Caterpillar ( Used Caterpillar 3516 Generator Set 1500 KW 480 Volts 1800 rpm Used Cat)

Fri, 29 Jan 2010 00:00:00 GMT

Used Caterpillar 3516 Generator Set

This Caterpillar 3516 Generator is in very good condition. It has under 1000 hours of total running time. It has a remote mounted radiator and is ready to go. It was new in 1987 and has plenty of life left. This unit does not have an engine mounted control panel or a mounted circuit breaker. This unit was used as part of a 3 generator system and was used in a paralling system. You will not find a cheaper CAT 3516 Generator ANYWHERE with under 1000 hours. Please do not hesitate to call. *TWO OF THESE GENERATORS ARE AVAILABLE.*

Engine Specification:
Engine Model: CAT 3516
Engine HP @ 1800 RPM: 2168
Engine KW @ 1800 RPM: 1617
Fuel: Diesel
Radiator: Remotely Mounted Included
Enclosure: NO
Circuit Breaker on Unit: NO
Engine Controls on Unit: NO Remotely mounted in paralleling gear

Generator Specification:
Generator End Model: Caterpillar SR-4
Standby Rated
KW Rating: 1500
KVA Rating: 1875
Voltage: 480 Volts
Hertz: 60
Phase: 3

Please call us anytime. This unit is IN STOCK and ready to go!

Fanuc (Fanuc F200iB F200 F-200 iB iA Robot RJ3 iB RJ3iB Controller)

Fri, 22 Jan 2010 00:00:00 GMT

Used Fanuc F-200iB Robot with RJ3iB Controls

Fanuc F-200iB Robot Specifications:
Axis: 6
Payload: 100 kg
H-Reach: 437 mm
Repeatability: ±0.1 mm
Robot Mass: 190 kg
Structure: Parallel Link
Mounting: floor, inverted, wall

The Fanuc F200i robot system offers the user six axis of movement and may be used for a variety of manufacturing processes. It is ideal for Sub-Compact Welding or Pedestal Welding. It may also be utilized for Nut Running, Material Removal or Part loading/positioning.

This unit is in stock and ready to ship. Please call us anytime for additional information or to place an order!

Mitsubishi (Mitsubishi M35K Used EDM Sinker CNC Tested)

Fri, 8 Jan 2010 00:00:00 GMT

Used 1989 Mitsubishi M35K CNC Conventional EDM Sinker (No Wire)

This is a fantastic lightly used machine. It is under power and can be inspected before you buy! This machine was recently recalibrated and tested by Mitsubishi so you can be confident that you are purchasing a solid machine. This machine is ready to go.

Specifications:

Work Tank Size:                 31.5" x 21.65" x 12.2"
Work Table Size:                27.56" x 19.69"
Travels (X, Y, Z)                  13.78" x 9.84" x 9.84"
Distance Quill to Table:    9.84" Min.
Distance Quill to Table:    19.69" Max.
Max Electrode Weight:      165 Lbs.
Max Workpiece Weight:    1000 Lbs.
Orbiter:                                 Standard NC Function
C-Axis Type:                        Optional
Pulsed Flushing
Vacuum Flushing
Generator                             Mits G35 with 35 Amps
Chiller                                   Fan Cooler
RS-232 Port
F.A.P. Onboard Programmer
CNC                                      Mits C4 with 12" Mono CRT

*This Machine also include a System 3R Tooling Kit (This Includes Macro Measuring Probe)

This Machine is in great condition and is ready to go. FOB Belgium, WI USA. Call us today.