This is a used Edmunds Gage Trendsetter II Digital Column Amplifier

Model#: E8300

Serial#: 0331478-003-2405

Accessory: 5911013

100-240VAC, 50/60Hz, 35W, 10A fuse

Includes Air Module E8303

The new Trendsetter II digital column readout from Edmunds Gages streamlines the features from an earlier generation analog model and provides new features and benefits to the user. In addition to now being a digital unit, the column can be used with electronic or air gaging tools in shop-floor bench top applications or engineered into semi-automatic gaging systems. Inch or metric results are displayed on a new tri-color LED bargraph as a deviation from nominal size in any one of eight scale ranges. Good, oversize, and undersize conditions are recognized by either green, red, or yellow bar colors. With its RS-232 output, measurement data can be downloaded to a variety of media for storage or further analysis.

Typical dimensions that can be measured with Trendsetter II include diameters, width, length, height, and thickness. Users can also measure geometric forms such as T.I.R., parallelism, roundness, tapers, and max or min peaks. The Trendsetter II comes equipped with an analog port to buss signals over I/O matrix lines. This provides the ability to connect multiple units together for measuring multiple dimensional features, such as the clearance between two mating parts.

With eight selectable full scale values, the Trendsetter II offers the flexibility to measure parts with a range of tolerances. The inch full scales range from 0.0002" to 0.05". The metric full scales range from 0.005 mm to 1.0 mm.

According to the company, Trendsetter II is easy to setup using just six keys on the front panel. Measurement results can be transferred from the unit to a PC, PDA, or printer.

This is a used Federal snap gage

Model#: 301P-2

Range: 1" - 2"


Anvil Size: .61" Square


Indicator can be rotated to read from from or rear of gage. Upper anvil can be retracted with lever. Anvils are made of tungsten carbide.


All Series 300P Snap Gages are fully adjustable with positive position locking at any point within range.

This is a used Myron L Company conductivity meter

Model#: EP-10

Serial#: 127524

Range: 0-10000 micromhos

Readout: 2-1/2" taut-band shock resistant meter

Accuracy: +/-2% full scale

Repeatability: +/-1%

Used Brookfield RVDVI+ Viscometer

Model: RVDVI+

Voltage: 100VAC

Frequency: 50/60Hz

Power: 22W

Includes carrying case and complete spindle set. Unit is untested but powers on without problems.

USWP (Used Surplus Without Factory Packaging) Hewlett Packard HP 8590A Option H51 RF Spectrum Analyzer

USWP (Used Surplus Without Factory Packaging) Hewlett-Packard 11945A Option E51 Close Field Probe Set.