Used 1989 Mitsubishi M35K CNC Conventional EDM Sinker (No Wire)

This is a fantastic lightly used machine.  It is under power and can be inspected before you buy!  This machine was recently recalibrated and tested by Mitsubishi so you can be confident that you are purchasing a solid machine.  This machine is ready to go.

Specifications:

Work Tank Size:                 31.5" x 21.65" x 12.2"
Work Table Size:                27.56" x 19.69"
Travels (X, Y, Z)                  13.78" x 9.84" x 9.84"
Distance Quill to Table:    9.84" Min.
Distance Quill to Table:    19.69" Max.
Max Electrode Weight:      165 Lbs.
Max Workpiece Weight:    1000 Lbs.
Orbiter:                                 Standard NC Function
C-Axis Type:                        Optional
Pulsed Flushing
Vacuum Flushing
Generator                             Mits G35 with 35 Amps
Chiller                                   Fan Cooler
RS-232 Port
F.A.P. Onboard Programmer
CNC                                      Mits C4 with 12" Mono CRT      

*This Machine also include a System 3R Tooling Kit (This Includes Macro Measuring Probe)

This Machine is in great condition and is ready to go.  FOB Belgium, WI USA.  Call us today.               

Used Buehler Ltd. Laboratory Cut-Off Saw

This is a great used cut-off saw.  It includes the optional extender.  Completely enclosed saw.

MODEL 1030 AB Cutter

Voltage 460

Phase 3

Hertz 60

Call us today to order this great used saw.

Used Combination Grinder, Polisher, and Sander

 

This is a nice combination unit so you do not need several pieces of equipment throughout your shop.

 

Brand Hammond Machinery Builders

Type Combination Grinder / Polisher / Belt Sander

Voltage 208 / 3 Phase / 60 Hz

 

This unit is in stock and is ready to go.  Call us today to order.

Used Riveter Model 600

 

This is a nice, used model 600 riveter.  It operates on standard 110 Volt singel phase power, so it will work anywhere.

 

Specifications

 

Brand National Rivet and Maufacturing

Model 600

Serial # 525

Voltage Requirements 110 Volts / Single Phase / 60 Hz

Jaw TJ73

Driver HL27

Anvil S280-3

Adapter 65-2-5

Arm 255-4

 

This unit is ready to go.  Call us and we will load it onto your truck for you today.

Used Lamina Hydra Drill

 

This is a Hydraulic Drilling System.  It has two drilling systems.  One is large, one is small.  This unit uses 460 Volts 3 Phase Power and is ready to go.  If you need a Hydra-Drill this is a good one.

 

Voltage Requirements:

 

Volts 460\

Phase 3

Hertz 60

 

Call us today with any questions.  This unit is ready to go.

Used Denford CNC Mirac Lathe

 

NEW ARRIVAL!

 

This is a true 2 Axis CNC Controlled lathe.  It runs on single phase 240v power and was used at a large university for their engineering/protoyping department.  It made very precise parts and was used very little.  This machine would be perfect for anything needing high precision.  It is designed to work with all types of material.

 

Denford Mirac Lathe Specifications:

 

Swing over Bed ............................................10" (250mm)

Maximum Turning Diameter .......................6.25" (160mm)

Maximum Turned Lenght ............................7" (180mm)

Spindle Bore No. 3 MT .................................0.8125" (21mm)

Spindle Nose A2 Type .................................1.625" (42mm)

Spindle Speeds .............................................0-5000 RPM

Spindle Motor ..................................................1 HP

Feedrates ........................................................0-1200RPM

X Axis Travel ....................................................3.375" (85mm)

Y Axis Travel ....................................................8" (200mm)

Coolant Capacity ............................................18 Litres

Machine Resolution .......................................0.0004" (0.01mm)

Machine Length ...............................................43.6875" (1100mm)

Machine Width ..................................................41.3125" (1050mm)

Machine Height ................................................24.5" (620mm)

Machine Weight ...............................................705 Lbs. (320Kg)

Electrical Requirements ................................240 Volts SINGLE PHASE

 

This unit was lightly used since new in 2000.  This CNC lathe is a very  rare, hard to find piece.  If you can find a similar machine for a cheaper price, CALL US!  We want you to get the best possible deal on the best possible equipment.  We at Global Industrial care about YOU, our customer.

Used Denford Triac VMC CNC Milling Machine

 

New Arrival!

 

A machinist's dream! This is an affordable SINGLE PHASE true CNC machine that you can use in your basement or workshop. Easy to use and ready to go. This unit was used for extremely precise prototyping work in the research department in a large university. Very low use. This machine is in excellent condition. Comes with all tooling and manuals. New in late 2000 this machine was over $40,000.00 with all tooling. Buy it now for a quarter of the price.

 

This is a true 3 axis CNC controlled milling machine.

 

The Denford Triac VMC is a versatile 3 axis CNC milling machine suitable for all levels of education, training, prototyping, and light production. Traditionally a metal cutting machine, it is suitable for prototyping complex 3D designs in a wide range of materials. A few features are:

  

• Manufactured to industrial standards
• Capable of cutting resistant materials such as steel, aluminum, copper, acrylics, plastics, and wax.
• Link to CAD/CAM software such as Pro/DESKTOP, ArtCAM, Techsoft, Mill CAM Designer, and AutoCAD.
• Totally enclosed high visibility interlocked guard.
• Feed rate and spindle speed override controls
• CE approved for safety
• Programming via International Standards Organizational Format
• Flexible workholding
• Upgradeable for inclusion in FMC/FMS/CIM systems.
• Optional software allows programming via ISO Format, incorporating controls such as FANUC and Heidenhain

Mechanical Specifications for Denford Triac VMC CNC Milling Machine:

 

Working Table Surface ......................................................19.5" x 6.25" (500mm x 160 mm)

Longitudinal Travel .............................................................11.5" (290mm)

Cross Travel .........................................................................7" (170mm)

Head Travel ...............................................................ATC 8" (200mm) 9.25" (235mm)

Spindle to Table ...................................................................11" (275mm)

Spindle to column ................................................................6.75" (170mm)

Spindle Taper (+ Quick Change Holder) .............................ISO30

Spindle Taper for ATC (Automatic Tool Changer) ................BT30

Machine Resolution .............................................................0.0004" (0.01mm)

System Resolution ...............................................................0.005mm

Spindle Speed Range .........................................................Programmable 0-4000 rpm

Spindle Motor ........................................................................1 HP

Machine Length (Including Control) ..................................74.25" (1885mm)

Machine Width ......................................................................35" (890mm)

Machine Height .................................................................... 28.375" (720mm)

Machine with ATC Weight ...................................................705 lbs (320 Kg)

Control Weight ......................................................................154 lbs (70 Kg)

Electrical Requirements .....................................................240 Volts Single Phase
  

This unit just arrived and is in excellent condition.  If you can find a similar machine at a lower price, give us a call!  We at Global Industrial want you to get the best possible machine at the best possible price!

USWP (Used Surplus Without Factory Packaging) Combination Hammond Grinder / Century Belt Sander.

USWP (Used Surplus Without Factory Packaging) Delta Ball Bearing Carbide Tool Grinder

Used Disc Grinder / Sander with Angle Adjustment and Dust Collector